- Видео 67
- Просмотров 147 936
haynuzband
Добавлен 24 апр 2007
Inside a Chill Pill
I bought 2 chill pills hoping they would be the trick for my wife and I. Turns out not so much.So Bill and me wanted to see if there was anything inside. There is!
Просмотров: 22
Видео
JR's V Gate
Просмотров 6283 месяца назад
This is Jr's Mr. Gasket V Gate. He sent it to me to rebuild and add my rods and levers. This is it finished. Hopefully he will leave a comment on his experience. This is NOT for sale. I have others that are.
Hurst Ram Rod for sale
Просмотров 5274 месяца назад
This Hurst Ram Rod shifter is for sale. It has been completely rebuilt, It comes with the levers, rods, mount and all the hardware you need to bolt it to your Muncie.
hurst ramrod movie
Просмотров 3,1 тыс.4 месяца назад
Built this one for Mark. I rebuilt his shifter and added my linkages. I will have one of these Hurst Ram Rod shifters for sale soon. It will be complete ready to bolt on using my supplied bolts.
Mr. Gasket V Gate Labor Day Special
Просмотров 1465 месяцев назад
Mr. Gasket V Gate 4 speed shifter ready to go.
Mr Gasket V Gate shifter with 2 " shorter Stick
Просмотров 2765 месяцев назад
Mr Gasket V Gate shifter with 2 " shorter Stick
Mr Gasket V gate shifter SHORTENED
Просмотров 1756 месяцев назад
For sale is a Mr Gasket V G ate shifter that was shortened 2 " and totally rebuilt. Short (1.5") mount stand offs with toggled reverse. All hardware and levers included.
Mr. Gasket V Gate for Ford Top loader
Просмотров 3068 месяцев назад
This V Gate shifter has all the parts to fit a Ford top loader. It is complete with all the hardware. Bolt on and adjust the rods. Tighter than stock. Visit Craig's list York, Pa for more info.Thanks for watching!
S Trap and Discharge pipe flush
Просмотров 79 тыс.8 месяцев назад
I do this to my sink every 6 months or there about. It pushes every thing out of my S trap and discharge pipe.
Chevy big and small block bellhousing dowel pin puller movie
Просмотров 44011 месяцев назад
I make these dowel pin pullers and sell them for $60 shipped. I made a movie using this puller before, but it is kinda long and boring. I also wanted to show that it will work with the flywheel in place.
Mr.Gasket V Gate 4 speed shifter
Просмотров 6 тыс.11 месяцев назад
This is my next V Gate shifter that is for sale. Super smooth. Complete with all levers, hardware, mount, rods and handle. Everything you will need to bolt this onto your Muncie. Supplied with new style shift levers. Clips will adapt to old style. I could supply if needed. Red or black reverse ball and handle script. Visit Craig's list of York, Pa for more details. Thanks for watching.
Mr. Gasket V Gate Shifter
Просмотров 594Год назад
This Mr. Gasket V Gate shifter was rebuilt and fitted to a Muncie M-20 transmission. It has custom shift levers, rods, revers toggle and selector shaft length. It is being sold with all those things and hardware needed to fit it to a muncie tranny. I can build you this setup or rebuild your shifter and add the rest.
Slammed Mr.Gasket V Gate shifter for sale Complete
Просмотров 522Год назад
Slammed Mr.Gasket V Gate shifter for sale Complete
Mr. Gasket fist grip v gate shifter for sale
Просмотров 2 тыс.Год назад
Mr. Gasket fist grip v gate shifter for sale
Mr. Gasket V Gate shifter with toggled reverse
Просмотров 239Год назад
Mr. Gasket V Gate shifter with toggled reverse
MR Gasket V Gate Shifter early I think
Просмотров 1,7 тыс.Год назад
MR Gasket V Gate Shifter early I think
Muncie M-20 and Hurst Super Shifter III combo for sale
Просмотров 2202 года назад
Muncie M-20 and Hurst Super Shifter III combo for sale
Chevy bell housing 5/8"dowel pin IN CAR removal
Просмотров 4342 года назад
Chevy bell housing 5/8"dowel pin IN CAR removal
CHEVY BELLHOUSING DOWEL PIN REMOVAL IN CAR!!!
Просмотров 1,4 тыс.2 года назад
CHEVY BELLHOUSING DOWEL PIN REMOVAL IN CAR!!!
m 21 and mr gasket v gate !!!!!SOLD!!!!
Просмотров 5452 года назад
m 21 and mr gasket v gate !!!!!SOLD!!!!
I ran one of these in my 65 Nova! Absolutely loved it
I am running one in my '67 El Big block! I love it!!!!!!
Omg ist a 2s whirlpools
What was better Hurst or Mr gasket?
In my opinion , Mr. Gasket.
Why did they stop making them?? I had 1972 duster with 340 and a Mr gasket shifter love it
Ran one these in my 65 Nova. Loved it
Why did they stop making these??
Fu
it was
Ran that very same shifter in my 65 Nova. Loved it
Sorry if this is a really stupid question, but do you connect this to a manual transmission or do you have to completely replace the transmission with this? I have a car with this shifter attached and I would like to switch it back to a standard H-pattern shifter so do i have to completely replace the transmission or just remove some parts and install some new ones? Thanks for any and all help.
This shifter bolts onto your transmission. The transmission can remain in the car.
I sent my shifter from California to Dan in York Pa for a rebuild. The workmanship and quality is outstanding. turn around time was very fast, I think 10 days or less. The shifter works fantastic, very smooth, Dan is the best on these shifters. Cry once and be done. This the best place to send your shifter- V Gate
I sent my shifter to Dan for a rebuild. The quality and workmanship is just outstanding The shifter works outstanding cannot wait to finish the car. Super great guy to work with. By far the best on these shifters
Thanks for the comment JT!!
No whirlpool😢
yea there was. right there near the end
Me thinking life before this desicion
Yea I see it
Absolutely the best of the best... The buying experience was super easy and Dan is awesome to work with. Now to the shifter! When it arrived it was packaged well and as described. I installed it in a 1975 Nova and was told by many that I would need to get rid of the bench seat as the bench seat would be in the way of shifting into reverse. After installing the shifter and cutting the tunnel about an inch toward the driver side and two inches back toward the rear I was able to get the shifter bolted up to the transmission, connect the linkage (without having to make ANY adjustments) and the shifter does indeed go into reverse without any issue from the bench seat. Upon completing the installation I took it for a test drive and let me tell you, I have NEVER had a shifter that shifted so smooth! Very pleased with the buying process and the product that Dan creates. You can tell that he loves his craft and what a craftsman he is! I highly recommend that if you are in the market for V-gate to purchase one from Dan as I can't imagine ANYONE being disappointed.
Thanks, Bill!!!
I’m the one who bought this shifter, very happy with it. This guy is for real he is not scamming anyone
Thanks for the kind words! Contact me if you run into any issues.
You should post how to restore a mr.gasket vertigate shifter I have one that's all rusted up and would love to get it working again
Waaaaaaay tooooo many steps to take are involved!
Used to have one in a gto. Loved it. Worked well as an anti theft device also. Few knew how to work it.
Even fewer today know!
Used to have one in a gto. Loved it. Worked well as an anti theft device also. Few knew how to work it.
I know a couple of guys that know.
sooo sweet
Why yes. Yes they are!!!
thanks for posting, I have one of these in my chevelle , and I had no idea that parts were around for it or what it was worth
Not many parts available. I make my own mostly.
So cool! Wish i had money for cool shit like that!
save up your money !!
Price?
$800 plus shipping.
That's pretty cool
Thankyou! I think so too.
I need 4 of them !
ok.
that will be $3,600 plus shipping.
Just need the stainless steel tube and ends , I can make them myself , Been a Mechanic for 40 years ! Got Chevelle , Nova and Camaro all with 4 speed trans .
After my father passed i pulled his 67 malibu out. As i dug around i found a mister gasket vgate. So badly wont to put it in because i know have it moving on it own power but lack of info has me waiting. Definitely subscribed in hopes to learn more !
I could rebuild it for you.
@@haynuzband I will be checking back with you sir !
Nice work what's something like this cost and what parts do you replace besides the obvious mount and rods?
Doug, I charge $900 plus shipping for a ready to install V Gate with ll the hardware.I modify not replace.
@@haynuzband do you make the selector rod that you sell?
@@dougs5334 yes I do. Made out of stainless steel.
Got it yesterday, looks good. I will install it some time next week. Thanks Dan.
Bought one of those vertigate shifters in 1977 for my 67 400 4-speed Firebird which I still own today the reverser is welded on also. I had that shifter on that car for about a month kill three good Muncie 4-speed, took that piece of crap off, put a good hush super shifter great shifter never look back.
Sounds like your V gate was not set up properly.
Thanks for the info, I found one of these in an abandoned barn and wondered how it works.
wanna sell it?
I had that same trans and shifter in my 67 SS Chevy Chevelle.
I took one just like this out of my '67 El Camino! Gonna put in a Mr. Gasket V Gate.
You didn't show the downshift sequence of lifting the small 'T' handle for 2nd. & 1st.
You are correct. Dag.....I miss something in every video we make.
For those who like crunching gears..😂😂 cool..
Who don't?
@@haynuzband like my autos these days.. getting lazy in ma old age..😂😂
@@rebekahfrench5747 Jammin one these shifters will make you feel young!
@@haynuzband worst thing is l own the other brand and don't have a top loader only single rail jobs..😂😂
@@rebekahfrench5747 well what you got?
Aren't automatics faster shifting?
Automatics are for sisies
@@haynuzband So sisies are faster.
Back in the day, I could shift just as fast or faster and had way more fun do'n it. 😊
It don't take too much skill to shift a slushbox!
Why was the firs run through the gears just after you pulled the neutral pin a failure? It shifted 3-4 two times and skipped 1-2. The rest of the shifts worked OK. I would sure hate to be on the line and dump the clutch only to be in 3rd gear. Is it a lack of lubrication thing? Must one run through the pattern a couple time after adjusting the linkage? Are these prone to doing this?
I just watched the video and noticed that I did not pull up on the selector handle far enough to engage the 1-2 shift lever. Notice the first couple of times the 1-2lever at the muncie does not move. Only the 3-4 moves.
@@haynuzband Thank you. I have never used one of these and you did a good job of explaining how it is used.
@@4speed3pedals I also gotta say that the shifter is 2-3 foot higher than it would be relative to me in the car. Makes it tough to pull that dag gone handle up!
Classic!
Nice work again Dan!
Thanks Jeff!
Hi do you have any available to ship right now thanks
I do.
Hi, How can I purchase one of these?
Info at the end of the video
A work of art!
Thank you! Mr. Gasket should have some of the credit.
W/O a doubt, the best stick shifter ever invented. And still being copied today. Bought one in 74 for my 66 goat, (for 75 bucks "new", from Honest Charlie), drove it on the street and strip for over 10 yrs. Threw "many" powershifts, and only missed 2 shifts. (Both times, from 1st to 2nd, for some reason, hit the neutral slot...hard). These things are bullet proof, and is much better than the Ram Rod. If I could find one reasonable, I would build a car around it. Nice job on the linkage on this one. Hope you got what you want for it.
This doubles as an anti-theft mechanism for anyone under the age of 70 😂 Gonna add one to my Nova here soon
yes it does !!
Funny you say this. Had a 65 tri-power GTO in the 70s, to 80s, and the car got stolen one night. Found it less than a quarter mile away on the side of the road, nothing broken, same amount of gas. (this was 1981) Guarantee some kids stole it, and didn't know how to shift it. Probably were in 3rd and 4th the whole time. LOL
Def anti theft!!!@@joequillun7790
Hi, do you build any Mr Gasket V gates to suit a Mopar A833 B/E body 4 speed
@@jeffreyhokin-ep8sv I could if you work with me. I think I have a mount but will need your help to determine rod length act.......
I just received my Mr gasket shifter from Dan and it's awesome! I'm very happy with it and recommend it to anyone looking for one.
Thanks Dan!!!!
Have you seen the last upgrade? Stops the third gear lever from draging with 2-3 shift jaming the dedents! I had this proplem with a dirty wornout , hi mileage shifter. Thuss the factory upgrade. A freind has this shifter, i need to get a picture of it.
I need a pic of that! I never had that problem though. send to my phone or my email that are both in this video. Thanks! Dan
Got a wore out one i think ill do like u
Are you finding these shifters ? Or making them I loved mine many years ago ❤❤
I find them and rebuild them.
I have been Told that for Years, I,m Old and need to get My Grandson to Make Video this Summer
I have Owned 2 MR Gasket 4 speeds since they came out, I,m Putting it Back in My 67 Chevelle Just before summer, Love these for racing, I Like your shift rods, I just Might have to make a set.
nice!make a video of it!
So how does it do for driving on the Street? Do you always have to raise the lever up to go to first n sec? I'd like to have one for when I race but kinda seems like it would a pain in the city
Hey Meg. Got one in both my '67 and '79 El Caminos. I love them on the street. Keeps you alert and moving. Also a good theft deterrent!
Do you have a video for reassembly of one? Mine fell apart while moving it from one trans to another,,,,
I do not
I like to get one how much does one cost ?
New and improved! $60 shipped. check it out: ruclips.net/video/UYJ0o1B7P5A/видео.htmlsi=ve1ZMXRRmmZyrn8z
I need one. How do I buy one ?
text me at 717 668 0159
hello! How do I buy one of these? Do I need one? thank you